DESCRIPTION
TIMBER EFFECTS is a water based, translucent interior/exterior coating specially designed for application to hardier board, fiber cement board and similar substrates to create a natural timber look.

It is based on a superior 100% acrylic resin specially chosen for its excellent exterior durability and film hardness. TIMBER EFFECTS contains a strong fungicide to promote preservation.FEATURES AND BENEFITS

Produces a timber grain effect.Excellent adhesion to hardier board, fiber cement board and similar substrates.Superior resistance to dirt pick-upExcellent exterior durability.Easy to use, easy clean up and non-toxic.Very good water resisting characteristics.

APPICATION
The system consists of one coat of GP PRIMER SEALER and two coats of TIMBER EFFECTS to obtain the desired effect. The GP PRIMER SEALER is required to overcome substrate color variations, provide a neutral background and a better key for the topcoat.

TIMBER EFFECTS is ready to use. Thinning is not required except on very hot days when 50ml of Hot Weather Thinner per one liter is recommended.

Stir well before use with a broad flat paddle.

Apply using a good quality, dry brush in one horizontal direction only, laying off in the same direction if required.
Do not over-brush. Brisk, uniform application is essential to maintain a wet edge, especially in hot weather.
Application commenced on a single area must be uninterrupted. Touch-up must be avoided. Re-coating time is one hour.
Do not apply in temperatures below 10 degrees centigrade.

THINNING
Not Applicable

DRYING
TIMBER EFFECTS is quick drying. Drying time is one-two hours depending on temperature, humidity and other weather conditions.

The product will leave some brush marks with darker and lighter shades upon drying, giving it the unique TIMBER EFFECT.

COVERAGE
The coverage is 10-12 square meters per liter.

COLOR
Red Cedar and Natural

GLOSS LEVEL
Matt Finish

CLEAN UP
Cleans easily. Wash brushes out whilst wet with water and detergent. Do not pour washings down sink or drains. Keep containers covered when not in use. Dispose of all containers in accordance with Local Council regulations.

SIZES
4 Liter Containers

PRECAUTION/SAFETY 
Avoid contact with skin and eyes. Should contact occur to the eyes, flush with plenty of water and seek medical attention should irritation take place. If ingested. DO NOT induce vomiting. Give plenty of water to drink. Seek medical advice immediately.

DISCLAIMER
The information contained here is given in good faith and is intended to be of assistance to users. The wide variety of surfaces and application procedures makes it impossible for us to assume any responsibility for the results obtained.