| Designation |
Description |
Principal
USES |
Coverage/
Addition Rates |
| CONTOP
PLUS |
Pre
blended non metallic floor hardener on mineral aggregate base. |
For
industrial floors, car parks, etc. For abrasion resistance and water-tightness. |
3-5
kg. / m2 |
| CONTOP
METALLIC |
Metallic
floor hardener |
For
warehouses, industrial floors etc. For abrasion & impact resistance. |
1.4-3.9
kg. / m2 |
| CONTOP
S |
Sodium
silicate based floor hardener and dust binder. |
For
warehouses, car parks, factories, loading bays etc. Both new & old
floors. |
6
m2 / litre/ coat. |
| CONGARD
EPOXY |
2
part epoxy resin coating. |
Provides
tough cosmetic finish to steel & concrete structures e.g. factory floors,
offshore steel structures. |
10.4
m2/ litre./coat. |
| CONGARD
EPOXYTAR |
Coal
tar epoxy coating for steel and concrete. |
Internal
& external coating for concrete & steel structures, pipelines,
sewage pits, marine structures, chemical plants etc. |
1.85
m2/litre at 400 d.f.t. |
| CONGARD
EPOXY H.B. |
2
part epoxy resin high build coating. |
For
factory floors, steel etc. where high build is required. |
For
150 micron 4.9 m2/litre |
| CONGARD
EPOXY THINNER |
Thinner
for Congard. |
To
dilute with Congard Epoxy for use as a primer. |
See
data sheet |
| EMER
EPOXY HP (CLEAR) |
High
performance chemical resistant epoxy coating |
For
concrete and steel that requires high chemical resistance. |
5-6
m2/litre /coat |
| DURAFLOOR
SL (T) |
Self
levelling 0.5-4 mm. high performance epoxy flooring system. |
For
light industrial plants, laboratories, plant rooms, pharmaceutical, food
& beverage, electronics factories. |
3.2
kg./m2 at 2 mm. |
| DURAFLOOR
N |
Vertical,
highly chemicak resistant epoxy coating. |
Protection
against acids, chemicals, in industrial use. |
See
data sheet |
| DURAFLOOR
E.B. |
2
Part low viscosity, epoxy resin system. Mix with Durafloor E.B. fillers
to produce a heavy duty screed on mortar. |
For
industrial floors, workshops, warehouses, ramps etc. |
3
kg./m2 at 8 mm. |
| DURAFLOOR
PRIMER 903 |
Primer
for Durafloor SL (T) & for epoxy mortar. |
Primer. |
5
m2/litre. |
