| Designation |
Description |
Principal
Uses |
Coverage
/ Addition Rates |
| CONDUR
EA1 |
Epoxy
adhesive and concrete repair material. Pourable & paste grade. |
Bonding,
patching, setting of starter bars and dowels, repair adhesive. |
See
data sheet |
| CONDUR
EA2 |
Epoxy
adhesive for bonding fresh concrete to old, hardened concrete or mortar
or steel. |
For
bonding fresh cementitious materials to old. |
5-6
m2/litre. |
| CONDUR
EG |
Flowable
3 component epoxy mortar for grouting self leveling repairs and patching. |
For
grouting bridge bearings, machine bases, fixing bolts & anchors, crane
rail tracks, cavities in concrete etc. |
2
kg./litre. |
| CONDUR
EM |
Trowelable
epoxy mortar for repairs, bonding, patching and coatings etc. |
Bedding,
filling or repair mortar for industrial floors, joint arises, bridge decks,
concrete runways, pre-cast units etc. |
2.10
kg./litre. depending on mix ratio. |
| CONDUR
EF |
High
build fine epoxy mortar with no slump properties. |
For
repair to both old & new concrete on vertical & overhead surfaces. |
Approx.
1.49 kg./m2 at 1 mm. thick |
| CONDUR
SC |
Pure
synthetic resin with low viscosity for sealing cracks cavities with a maximum
width of approx. 5 mm. |
For
concrete crack repair e.g. to bridges, beams, columns, precast elements
etc. |
See
data sheet. |
| CONDUR
HS |
High
strength - three component epoxy resin grout. |
For
grouting under machinery, brige bearings and other critical areas. |
2
kg. / litre. |
| CONGARD
ZINC |
Epoxy
Zinc coating for rebar. |
For
coating rebar in concrete repair or where exposed to elements. |
11.8
m2/litre at 50 microns d.f.t. |
| CONGARD
ST |
High
build, surface tolerant epoxy coating for rebar & steel. |
For
rebar and steel protection. |
6.5
m2/litre at 125 microns d.f.t. |
