NATURAL STONE SEALER (page 2)

Natural Stone Sealer is a clear 100% acrylic sealer designed to seal, bind, and waterproof vertical surfaces of natural stone materials. Natural Stone Sealer is formulated with special UV resistant resins to increase surface hardness and help against staining, soiling, algal and fungal growth. Ideal for sealing natural limestone, sandstone, rammed earth and other natural unglazed stone surfaces with high porosity. Always test the product on a small inconspicuous area first to ensure the product is achieving the desired result prior to application over the entire area.

FEATURES AND BENEFITS

• Seal, Binds and Protects most Masonry surfaces. 
• UV Resistant 
• Protects against Staining and Soiling 
• Algal and Fungal resistant 

APPLICATION
Stir well before and during use. DO NOT SHAKE the contents, as shaking will produce bubbles, which may become trapped on the surface. Apply by brush, roller or spray.
Allow to dry for 24 hours before applying the second coat. Second coat should be applied direct from the container.
Apply each coat neat and evenly and take care not to over apply on pitted surfaces as ponding of product may occur there after causing white blooming. Proper penetration of the first coat is very important.
Do not apply if temperature is below 10ºC or if rain is expected within 24 hours. Ensure adequate ventilation during use.

THINNING
Only required on first coat 10-15%.

DRYING
Natural Stone Sealer is touch dry in approximately 1 hour but should be left for 24 hours before re-coating.
Drying times are a guide only. Longer drying times may be required under cooler or humid conditions.

COVERAGE
Approximately 5 square metres per litre on porous surfaces. Coverage rates are dependent on surface porosity, texture and application technique.

COLOUR
White appearance in container but dries clear.

GLOSS LEVEL
Not applicable but over application can result in the surface becoming glossy.

CLEAN UP
Clean all equipment promptly with warm water and a little detergent followed by a fresh water rinse.
Do not pour contents or washings down drains or sinks. Dispose as per your local council regulations.

SIZES
Available in 5 and 20 litre containers. Larger sizes available on request.

PRECAUTIONS/FIRST AID
It is recommended that normal personal protective clothing should be worn, including coveralls, impervious gloves and goggles. Avoid unnecessary skin contact and inhalation – use a suitable respirator if spray application is employed. If swallowed, contact a doctor. Give water to drink and do not induce vomiting.

DISCLAIMER
The information contained here is given in good faith and is intended to be of assistance to users. The wide variety of surfaces and application procedures makes it impossible for us to assume any responsibility for the results obtained.